Eukula Care Emulsion
The floor must be pre-cleaned of loose dirt with a broom or vacuum-cleaner. Regularly wipe up fine dirt, dust or water-soluble deposits with a slightly damp mop or cloth. For this pour 0,1-0,2 l euku care-emulsion in approx. 10 l warm water. At the same time as cleaning, the floor is given substances for its care. Avoid applying too much water, generally, use as little water as possible on wood floors.
Please also pay attention to our Cleaning and Care Instructions.
When used for basic cleaning, increase the dilution to a ratio of 1:10. Begin by mopping the floor with the solution; after allowing it to soak in for a short time (5 minutes) rub down the floor vigorously while wet (e.g. scrubbing brush or Monodisc/green pad), vacuüm off the dirty solution and mop the floor clean with clear water. Ventilate well to accelerate the removal of the water!
After basic cleaning, or when the floor has been severely worn down by use and cleaning, the floor must be subsequently oiled. For this purpose, we recommend euku refresher (contains wax).
0,1-0,2 l diluted in 10 l warm water. In this ratio 5-10 applications per litre.
Can be used and walked on after the water has dried out.