Faber Cristalfab White Pad

Faber Cristalfab White Pad is a new concept crystallizer for marble and limestone to be applied with a white pad. This product has been formulated to give a high sheen and brightness to any type of marble, even the most difficult ones. It can be used to replace the traditional crystallizers, thus allowing an easy and fast result. This product allows an excellent resistance to foot traffic and a good protection against dirt, making it practical for every day maintenance. Constant use does not cause yellowing, burns or an orange-peel look to the surface. The product does not contain any wax, but acts both chemically and mechanically right on the material. It is also excellent for the maintenance of surfaces honed with powders or mechanically. It is also suitable for use after honing on marbles that cannot be polished with powders.

Directions for use:

• Faber Cristalfab White Pad must be used undiluted.
• Shake well before use and work on small surface portions of around 2 sqm at a time.
• Ensure all surfaces are clean, free of loose dirt and debris, and are completely dry before application.

Apply 1 to 2 small spoons of product to each surface portion and buff with concentric movements using a monobrush with white pad. Allow the product to dry by prolonging the movement with the machine until all of the residue will have been removed. In order to obtain a higher brightness degree or artificial closure, repeat the application. The product does not give any superposition defect, therefore once the maximum brightness has been obtained, no difference can be remarked between two areas polished separately. After polishing the whole surface, dust off with a dry or slightly damp mop. The surface can immediately be open to foot traffic. Maintain with a suitable cleaner, starting from the following day.

This product will cover approximately 40-50 sqm per kg.

The safety data sheet for this product is available here. View our other faber products here.